Mts Sensor C OEM ANALOG Position Sensors

Access stock, delivery and price for Mts Sensor C OEM ANALOG Position Sensors with Mts Sensor. Mts, Sensor, Mts Sensor, C, Mts C, Sensor C, Mts Sensor C, OEM, Mts OEM, Sensor OEM, Mts Sensor OEM
Product number C OEM ANALOG
Producer Mts Sensor

Description: C OEM ANALOG ( Mts Sensor )

Mts Sensor C OEM ANALOG Position Sensors



Product Name: Mts Sensor C OEM ANALOG Position Sensors
Product Brand: Mts Sensor
Product Code: C OEM ANALOG
Product Artikel: Mts Sensor C OEM ANALOG Position Sensors
nput Measured value: Position Stroke length: 72, 109, 128, 148, 162, 186, 194, 217, 250 mm Output Voltage: 0.1 - 4.9 VDC Resolution: analog output signal Signal without magnet: not specified Feature: At 5 VDC operating voltage output is ratiometric to operating voltage Accuracy Linearity: ± 0.15 mm by means of magnet 401842, between 5 % and 95 % of stroke length Zero tolerance: ± 1 mm Hysteresis: ± 25 µm Repeatability: ± 25 µm Temperature coefficient: ± 0.005 % per °C Update time: 500 Hz (2 ms) Operation conditions Operating temperature: -40 °C…+75 °C Storage temperature: -20 °C…+85 °C Pressure up to 2500 m altitude IP Protection IP30 3 - DIN 40 050 Part 9 – Protection against foreign bodies – Protected against foreign bodies from Ø 2.5 mm 0 - DIN 40 050 Part 9 – Protection against water – No protection Environmental testing Shock test: IEC-68-2-27 10 g (11 ms) –> Single hit 10 g (11 ms) 1000 shocks per axis Vibration test: IEC 60068-2-6 (10…2000 Hz) 10 g Sinus (resonance frequencies excluded) EMC-test: Emission according to EN 61000-6-4  CISPR 16-2-3 – Disturbance field strength (measurement distance 3 m)  CIPSR 16-2-1 – Disturbance current (DC voltage supply)  Immunity according to EN 61000-6-2 EN 61000-4-2 – Electrostatic discharge (ESD) (Compliance only with corresponding protection housing, see H2 and M1) EN 61000-4-3 – Radiated electrosolenoidic radio-frequency, free radiated (Compliance only with corresponding protection housing, see H2 and M1) EN 61000-4-4 – Electrical fast transient (Burst) EN 61000-4-5 – Surge EN 61000-4-6 – Conducted radio-frequency, line guided EN 61000-4-8 – Power frequency solenoidic field Form factor, material Housing: POM Protective pipe: nylon blue Electrical connection Supply voltage: CS: 5 VDC (tolerance range 4.75 - 5.5 VDC), CM: 12 VDC (tolerance range 9 - 15 VDC) Max. power consumption: max. 40 mA Output load: analog: > = 10 kΩ Overvoltage protection: CS: up to 19 VDC short term CM: up to 29 VDC short term Polarity protection: VDC - GND Operating voltage quality: CS: 5 VDC CM: 12 VDC Load control: ± 0.1 % ± 0.15 % Grid control: ± 0.05 % ± 0.05 % Ripple: < 50 mVpp < 100 mVpp Mechanical connection Screw connection: 2 screws M3 x 37, max. tightening torque 0.4 Nm, with 3 mm bore hole Terminal connection: by means of O-rings (consultation with MTS required)

Other Recommended Products Mts Sensor