Mts Sensor TH Analog Linear Position Sensor

Access stock, delivery and price for Mts Sensor TH Analog Linear Position Sensor with Mts Sensor. Mts, Sensor, Mts Sensor, TH, Mts TH, Sensor TH, Mts Sensor TH, Analog, Mts Analog, Sensor Analog
Product number TH Analog
Producer Mts Sensor

Description: TH Analog ( Mts Sensor )

Mts Sensor TH Analog Linear Position Sensor



Product Name: Mts Sensor TH Analog Linear Position Sensor
Product Brand: Mts Sensor
Product Code: TH Analog
Product Artikel: Mts Sensor TH Analog Linear Position Sensor
Output Current 4(0)…20 mA, 20…4(0) mA (minimum / maximum load 0 / 500 Ω) Measured value Position Measurement parameters Resolution 16 bit; 0.0015 % (minimum 1 µm) 1 Cycle time 0.5 ms up to 1200 mm stroke length 1.0 ms up to 2400 mm stroke length 2.0 ms up to 4800 mm stroke length 5.0 ms up to 7620 mm stroke length Linearity 2 < ±0.01 % F.S. (minimum ±50 µm) Repeatability < ±0.001 % F.S. (minimum ±2.5 µm) typical Hysteresis < 4 µm typical Temperature coefficient < 30 ppm/K typical Operating conditions Operating temperature −40…+75 °C (−40…+167 °F) Humidity 90 % relative humidity, no condensation Ingress protection Version D, G and E: IP66 / IP67 (if properly connected by means that support IP66 / IP67 (pipe, gland, etc.)) Version N: IP66, IP67, IP68, IP69K, NEMA 4X, depending on cable gland Shock test 100 g (single shock), IEC standard 60068-2-27 Vibration test 15 g / 10…2000 Hz, IEC standard 60068-2-6 (resonance frequencies excluded) EMC test Electromagnetic emission according to IEC/EN 55011 +A1 Class B Electromagnetic immunity according to IEC/EN 61000-6-2 The sensor meets the requirements of the EU directives and is marked with Operating pressure 350 bar static (5076 psi static) Magnet movement velocity 3 Any Design / Material Sensor electronics housing Stainless steel 1.4305 (AISI 303); option: Stainless steel 1.4404 (AISI 316L) Flange See “Table 1: TH rod sensor threaded flange type references” on page 6 Sensor rod Stainless steel 1.4306 (AISI 304L); option: Stainless steel 1.4404 (AISI 316L) Stroke length 25…7620 mm (1…300 in.) Mechanical mounting Mounting position Any Mounting instruction Please consult the technical drawings and the operation manual (document number: 551513) Electrical connection Connection type T-Series terminal Operating voltage +24 VDC (−15 / +20 %) Ripple ≤ 0.28 VPP Current consumption 100 mA typical Dielectric strength 700 VDC (DC ground to machine ground) Polarity protection Up to −30 VDC Overvoltage protection Up to 36 VDC

Other Recommended Products Mts Sensor